Hi, my name is Morten we have worked with eddison robots 

we have failed and do task 1 for there was much trouble with the robot but we clear and settle other tasks 2:23 and we forgot and store so we do not get shown so far shown no we sheets

My name is Marge and I'm from Haanja. I was absent when we were drawing the polygon but the others did a good job. However, when we started programming the robots I wasn't absent. I used an EV3 robot to do task one.

I calculated the circumference of the wheel and measured the length of one side. There were many different ways to make the robot move on the angle but I chose to make one wheel move forward while the other moved back. I had to put the size of the angle to make the robot turn correctly. I wish there was some fancier way to find the angle but if I'm honest, I just put some random sizes and repeated it until the robot didn't drive outside or inside of the lines. 

Making the robot follow the line and not drive off of it took a long time but eventually I succeeded. I learned how to program the robot and had fun while doing it aswell. 

Here is a link to the video of the robot driving on the polygon:

https://drive.google.com/open?id=0B3qwaadSakAcV1ZpZHB1NXdaTms

Here is a picture of the program i made for the robot :)

Hei, I'm Carmen from Türi

 

We (me and Marleen) started with triangle.