Spanish projects

  • These are some projects that Spanish students have done in their 'Technology class':

    MY TECHNOLOGY PROJECT


    In my technology work (wooden object to introduce pencils,pens,...), Tomas my friend and I need to built the work: wood, jigsaw, sandpaper, paintings, brushes, scissors, stickers, glue and silicone. First Tomas and I draw the pieces on the wood, then we cut the pieces with the jigsaw, after that we paint the pieces with paintings and with glue and scissors we cut and put the stickers in it places. Then we use the silicone to join the pieces, this step was very difficult for me because it is my first time. We made the project in the second term, we finish the project in five days. I can improve the project because I learn to put silicone and I have experience and this is my work.

     

    organizadores 097.jpg

     

    Alejandro Velardiez...

    Works

    My technology project is a bridge made up of straw. I made it with my friend Jorge, we met in his house and we were making it from five o’clock to eight o’clock. This bridge could hold seven kilograms, this is a lot because the other bridges could only hold two hundred fifty grams. To make the bridge we needed three straw’s packs and two sellotape’s roll. For the floor of the bridge we use forty straws and we join them with sellotape. We haven’t got any problems and I think that we can’t do the bridge again because we need a lot of materials.                                                             





    Javier Ortiz

       A BRIDGE MADE WITH STRAWS.

     

    Some weeks ago Juan, our Technology teacher, ordered us to make a bridge with straws. At first we were very excited about this because we didn’t know if it's going to resist the weight that some weeks after we tried.

     

    I used straws and I made it in a room. I made it in two days. I used sellotape and a little rubber band.

    I had problems when I tried to introduce a straw into another straw. If I make it again I will use more straws.upload_-14-1024x768.jpg


    Celia Suárez
     

    One of the projects that we did in Technology class, was a bridge made with straws and adhesive tape. We did all the bridge at home, for me, it took about three hours. It was a little bit difficult because it wasn’t easy to put together all the straws of the base.The bridge had to be 50 cm long and then, in class, we put weight over the bridges and the strongest supported about 7kg.

    Decorate a bridge made with straws it can be a little bit impossible (you can’t paint it, for example) but I tried to match the colors of the straws and I think that the result was cool.

    If I build a new bridge, I think that it can be strongest if I put more straws and more tape, but my bridge support about 2 kg, and I’m happy with that.

    Lucía Fernández ...

    Hi my name is David and I go present my technology project. My technology project is a bridge and It is made with straws, yarn, cellophane because is so let us use our teacher. We made this bridge with my friend Alejandro in class, but we not finished in class, we finished in Alejandro´s house. We not decorated this project because the straws were colorful. We need two weeks for finish this project because was very difficult but we are happy with this result. The second week we had a problem, I didn't have time for finish the bridge; but Alejandro finish the project with help of his mother. If I did it again, I would do it the same way, because before deliver, I had made ​​the bridge and a load test with juice cartons weighing approximately 300g, it endure five bricks! This photography is when we made the load test. The time of fall!



     

    Hi! My name’s Adriana and I will present my desktop  organizer.


    organizadores 103.jpg

    This is my organizer. It is made of wood,silicone to glue wood and decorate it how you want. We had a time of three weeks. I decided to do(as it was to me on day to do so)put the name of my best friend and I. See you soon!

         MY PENCIL BOX

    David Blanco and me, made a pencil case.This project consisted of doing a pencil box using wood.So, we have been in our workshop using tools to woodwork such as a saw, silicone and rulers .For decorate this project, we used acrylic and paints and we decorated it like a castle,because we put three containers with this form. To do this project we have used 6 hours in three weeks. The problems started when we had to use silicone to join the “wall”.To improve it, we can join a sharpener or a post-it.

    MY TECHNOLOGY PROJECT

     

    Our technology project was pencil box. The project was building with Laura. We used a board of wood, pencils, photos, silicone and temperas. For this project we spent 4 hours in the technology studio. We made it drew the pieces with the good measurement, after we cut them and finally we glued all of the pieces. Then we decorated it with a face of a minion that encourage  our team: Extremadura Femenino, for the decorated it we used green, black, white and yellow temperas for painted him, I put some photos of our team and wrote a message in it. Before the project finished we had to changed some measurements because the piece didn’t put it well. We can improve the project if we will put a pencil sharpener in a part of the pencil box. I’m sorry, but I can give you a photo because I haven’t got it.


    Isabel Esteban Rosario.  

    Technology project



    In technology class, we built a strawbridge. Next, we were going a resistance proof with the bridges. The bridge finally was 50 cm long. The bridge was built with straws, sellotape and thread. First, I did the base with straws united with cellotape; then, I did the columns over the base; and finally, the reinforcements with straws and thread. After that, I decorated it with thread with differents colours and straws with differents colours. I didn't have any problems because my brother Javier helped me. When I will do that the next time, I can do it than bigger and with more decorations.

    Elena García

    My Technology Project

     



     

    This is a desk organizer, it is make with wood and we make it in technology class with wood and silicone.

    We decorated it with names, sentences and pictures. We took seven weeks to do this, we have a problem with the wood, because we doesn't have more, we can improve it with photos, or paintings.

    After finish the desk organized we do two more but they were not well.

    It serves for put the rulers, the pencils, the pens, the rubbers...

     

    Ainhoa Sánchez

       A BRIDGE MADE WITH STRAWS.

     

    Some weeks ago Juan, our Technology teacher, ordered us to make a bridge with straws. At first we were very excited about this because we didn’t know if it's going to resist the weight that some weeks after we tried.

     

    I used straws and I made it in a room. I made it in two days. I used sellotape and a little rubber band.

    I had problems when I tried to introduce a straw into another straw. If I make it again I will use more straws.
    Hello I am Jorge Vidal Álvarez and I am to talk about my project of technology. What is it? It is a bridge of straw. His meassure are 72x30 cm. What materials did you use? We only use straw of differents colors for example straw orange or straw pink. How and where did you make it? We do using sellotape to unit the straw. Only that. We do that in our hoese. My classmate was Javier Ortiz Merino. How did you decorate it? We didn’t decorate that because the straw were of many colors. How long did it take you to finish the project?  We finished in three weeks. It was a long project. Did you have to face any problems or difficulties? No it was very easy. Can you improve it if you make it again? How? Yes. I think we can improve putting into the straw some iron.
     
     
     
     
     
     
     
     

     

     

    a

     

    PROJECTS

    MADE IN CLASS:

    Helloo, today I will tell you the exercise in mi class the last month, my teacher: Juan Fernandez de Vega he is the teacher in technology subject. He ask one exercise to do  in class.This exercise is manufacture one bridge,  the exercise is very funny and educative, this are the rules to built the bridge: The persons can stand in the group are 2 persons, the large of the bridge can (+50 centimetres), the materials to built is:straws, thread,and cellophane. The time to finish this exercise are 2 weekends. Every students finish the bridge in time. The students describe the exercise, and this is her description:

    -The exercise is very funny and educative, we can learn many things to built the bridge:how to do one plane,the structures and the rules to build one bridge.

     

    This is our results of the exercise we hope you like it our results:

    CAM00254.jpg

    Author: Flor Jaime Cabeza De Vaca.

    Structures: wood pincel box

    This project was consisting do a pencil box using wood.So we've been in our workshop using tools to woodworks.

    For decorate this project we have using acrylic and paints and we decorated like a castle.

    It has three containers like a castle.

    Author: David Del Hoyo Carcaboso

     

    Hi! My name’s Adriana and I will present my desktop  organizer.

    This is my organizer. It is made of wood,silicone to glue wood and decorate it how you want. We had a time of three weeks. I decided to do(as it was to me on day to do so)put the name of my best friend and I. See you soon!

    Authors:Adriana and Ainhoa

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

     

                                                                  Thanks for your attention.

    Author: Laura Carrasco